## Calibration Overview The `CALIBRATION` screen has a dedicated panel for each calibration of the system. A left-side menu lists every calibration relevant to your current hardware configuration; selecting an entry opens its panel on the right. The calibrations that keep a table of measurements (water, sound and your own calibrations) save it in a `.csv` file in `data//`, which can also be browsed and plotted from the `DATA` screen. The camera calibration saves a `.json` file in the same folder, the corridor thresholds are saved as settings, and the OptoGrid panel does not save anything. * **`WATER_CALIBRATION`:** Calibrates the relationship between valve opening time and the volume of water actually delivered, per behavior port, and lets you test a calibration by requesting a target volume. With Bpod it works out of the box; with any other controller, it needs a water calibration task written for that controller. See [Water Calibration](water.md). * **`SOUND_CALIBRATION`:** Calibrates speaker output so a requested sound level corresponds to an actual, measured volume. See [Sound Calibration](sound.md). * **`CAMERA_CALIBRATION`:** Generates a printable symmetric circle grid used to calibrate the lens distortion of the box camera. See [Camera Calibration](camera.md). * **`CORRIDOR_THRESHOLD_CALIBRATION`:** Lets you position the four corridor detection areas and tune their day/night pixel-detection thresholds while previewing the result against a recorded corridor video. See [Corridor Threshold Calibration](thresholds.md). * **`OPTOGRID_CALIBRATION`:** [OptoGrid](https://github.com/erlichlab/optogrid) is a wireless, head-mounted optogenetic stimulation device: a 64-µLED array over the brain, controlled over Bluetooth, with an IMU that records head movements. This panel shows a map of its LEDs to compose a selection and checks the device (battery, parameters) over Bluetooth. See [OptoGrid Calibration](optogrid.md). Besides the built-in calibrations, you can create your own and have them appear here alongside them — see [Custom Calibrations](../advanced_customization/calibrations.md).