3D Printing Files
You’ll need to 3D print the following parts to build the Training Village system. We provide the raw 3d models in STL files, and also the all of them arranged in a single 3mf. For easy replacement, we also provide the 3mf files of some subsets of parts. The 3mf files have the optimal orientation for accuracy and the supports needed (the parts don’t need supports unless mentioned). The 3mf files were generated with Bambu studio, we recommend it to open them.
The full print requires an estimate of 1.1kg of generic pla filament and about a day and three hours to print.
Corridor Files
The corridor files take an estimated 700g of filament and about 15 hours to print on a Bambulab p1s.
Corridor Home Top (Needs support)
Corridor Box Top (Needs support)
Corridor RFID 1 (Needs support)
Corridor RFID 2 (Needs support)
Connectors for tubes and cages
The corridor parts take an estimated 300g of filament and about 10 hours to print on a Bambulab p1s.
Cage connector (Needs support)
Tube connector (Needs support)
Door System
The door system parts take an estimated 50g of filament and about 1 hour and 15 minutes to print on a Bambulab p1s.
Camera Mount
The camera mount parts take an estimated 15g of filament and about 40 minutes to print on a Bambulab p1s.
Camera Bottom (Needs support)
Cable organizer
The cable organizer parts take an estimated 90g of filament and about 2.5 hours to print on a Bambulab p1s.