Calibration Overview

The CALIBRATION screen has a dedicated panel for each calibration of the system. A left-side menu lists every calibration relevant to your current hardware configuration; selecting an entry opens its panel on the right. The calibrations that keep a table of measurements (water, sound and your own calibrations) save it in a .csv file in data/<SYSTEM_NAME>/, which can also be browsed and plotted from the DATA screen. The camera calibration saves a .json file in the same folder, the corridor thresholds are saved as settings, and the OptoGrid panel does not save anything.

  • WATER_CALIBRATION: Calibrates the relationship between valve opening time and the volume of water actually delivered, per behavior port, and lets you test a calibration by requesting a target volume. With Bpod it works out of the box; with any other controller, it needs a water calibration task written for that controller. See Water Calibration.

  • SOUND_CALIBRATION: Calibrates speaker output so a requested sound level corresponds to an actual, measured volume. See Sound Calibration.

  • CAMERA_CALIBRATION: Generates a printable symmetric circle grid used to calibrate the lens distortion of the box camera. See Camera Calibration.

  • CORRIDOR_THRESHOLD_CALIBRATION: Lets you position the four corridor detection areas and tune their day/night pixel-detection thresholds while previewing the result against a recorded corridor video. See Corridor Threshold Calibration.

  • OPTOGRID_CALIBRATION: OptoGrid is a wireless, head-mounted optogenetic stimulation device: a 64-µLED array over the brain, controlled over Bluetooth, with an IMU that records head movements. This panel shows a map of its LEDs to compose a selection and checks the device (battery, parameters) over Bluetooth. See OptoGrid Calibration.

Besides the built-in calibrations, you can create your own and have them appear here alongside them — see Custom Calibrations.